Tesla Model S

Rear Parking Brake Pads – 1003460-00-E

Rear Parking Brake Pads โ€“ EV-Specific, Low Dust
Replacement for Tesla PN:
1003460-00-E / 100346000E

Rear parking brake pads โ€ข For small parking brake caliper (with Brembo rears) โ€ข Fits 2012โ€“2021 Tesla Model S

Premium rear parking brake pads for Tesla Model S model years 2012โ€“2021. These pads are specifically engineered for electric vehicles and are designed to be virtually noise free and low dust, while remaining rotor-friendly
and long-lasting.

Intended for the rear parking brakes, this set fits the small parking brake caliper used alongside the Brembo rear calipers. Replace your Tesla Model S rear parking brake pads with these quality replacements from EV Parts Online and restore confident, quiet parking brake performance.

Key features & benefits
  • Premium NVH control โ€“ Assembled with DFC rubber-steel-rubber shims
    to improve noise, vibration, and harshness characteristics.
  • Chamfered & slotted โ€“ Where applicable, pad edges and slots help
    reduce noise and promote smooth engagement.
  • Scorched for fast bed-in โ€“ Scorching removes uncured bonding agents,
    minimizing break-in time and boosting stopping power from the first application.
  • Positive mold construction โ€“ Promotes consistent friction material
    density for predictable braking performance.
  • Excellent pad life โ€“ Rotor-friendly formulation offers long service
    life while being gentle on parking brake rotors.
  • EV-specific tuning โ€“ Friction material is specifically made for
    electric vehicles, where friction brakes see different duty cycles than ICE platforms.
Noise & dust characteristics

These pads are designed to be virtually noise free with very low dust output, helping keep your Teslaโ€™s wheels cleaner and avoiding the squeals and squeaks that can come from lower-quality parking brake linings.

Component Rear parking brake pad set (left & right)
Application Rear parking brake caliper (small auxiliary caliper used with Brembo rear calipers)
Tesla OEM PN (replacement for) 1003460-00-E / 100346000E
Model Years 2012โ€“2021 Tesla Model S (see trims below)
Noise / Dust Virtually noise free, low dust, rotor friendly
Construction Positive mold, scorched, chamfered/slotted (where applicable), DFC rubber-steel-rubber shim
Vehicle compatibility

Fits the rear parking brake caliper on the following Tesla Model S trims:

  • Tesla S Base โ€“ 2012โ€“2015
  • Tesla S Signature โ€“ 2014โ€“2015
  • Tesla S 70 โ€“ 2016
  • Tesla S 70D โ€“ 2016
  • Tesla S 75 โ€“ 2017
  • Tesla S 75D โ€“ 2017โ€“2019
  • Tesla S 85 โ€“ 2016
  • Tesla S 85D โ€“ 2016
  • Tesla S 90D โ€“ 2016โ€“2017
  • Tesla S 100D โ€“ 2018โ€“2019
  • Tesla S P85D โ€“ 2016
  • Tesla S P90D โ€“ 2016
  • Tesla S P100D โ€“ 2017โ€“2019
  • Tesla S Long Range Plus โ€“ 2020
  • Tesla S Performance โ€“ 2020
  • Tesla S โ€œMayorโ€ โ€“ 2020 (per catalog listing)

Note: These pads are for the small rear parking brake caliper used in combination with Brembo rear calipers. They are not the main rear service brake pads. If you are unsure which rear brake configuration your Model S uses, please contact us with your VIN before ordering.

Service & installation notes

Replace parking brake pads in axle sets (both sides) for even holding performance. Inspect the parking brake rotors for wear and corrosion, verify that caliper slides and mechanisms move freely, and perform any required parking brake calibration after installation according to Tesla procedures.

โš ๏ธ
Maintenance tip: Periodically apply and release the parking brake to keep mechanisms free, especially in humid or salty environments. If you notice weak holding power on hills or hear grinding noises when engaging the parking brake, inspect and service these pads promptly.

PRICE:

$62.45

Gruber Motors