Tesla Model S/3/X/Y Rear License Plate Screws — Stainless Steel (Set of 4)
Replaces Tesla PN: 1019047-00-D, 1453796-00-A • Set of 4 stainless-steel pan head screws
Upgrade your Tesla rear license plate hardware with these high-quality stainless-steel replacement screws from Gruber Motors.
Designed as a direct replacement for OEM hardware, they resist rust, hold tight, and keep your plate secure across every Model S, 3, X, and Y listed below.
Why these fail
- Factory hardware can rust or stain the paint around the plate area over time.
- Soft or worn heads are prone to stripping during plate changes or detail work.
- License plate screws are easily lost during dealer swaps or body repairs, leaving plates loosely mounted.
- Mismatched hardware from generic kits can look non-OEM and unprofessional on a Tesla.
Our solution
- Stainless-steel construction — excellent corrosion and chemical resistance, ideal for daily-driven EVs.
- Pan head design — clean OEM-style appearance that seats flat against the plate.
- Direct replacement — engineered to replace Tesla PN 1019047-00-D and 1453796-00-A.
- Model-wide coverage — one kit works across most Tesla Model S, 3, X, and Y model years (see below).
- Complete set of 4 — enough hardware to mount or refresh the rear plate on a single vehicle.
- Backed by EV Parts Online — the same team that supports Gruber Motors’ Tesla service operations.
At-a-glance specs
| Application |
Rear license plate mounting screws |
| Compatible Models |
Tesla Model S (2012–2024)
Tesla Model 3 (2017–2024, incl. Highland)
Tesla Model X (2016–2024)
Tesla Model Y (2020–2024) |
| Material |
Stainless steel; good chemical and corrosion resistance (may be mildly magnetic) |
| Head Style |
Pan head, Phillips-style drive (OEM-style look) |
| Quantity per Kit |
4 screws (enough for one rear license plate) |
| Replaces Tesla PN |
1019047-00-D, 1453796-00-A |
Service & coverage
This kit is intended for the rear license plate mounting points on Tesla Model S, 3, X, and Y vehicles in the model years listed above. It is ideal for detailers, body shops, and Tesla owners replacing missing hardware, correcting rusty screws, or installing new plates on freshly delivered or CPO vehicles.
💡
Maintenance tip: When installing new license plate screws, hand-start each screw to avoid cross-threading, then snug them down gently. A tiny dab of anti-seize or dielectric grease on the threads can make future plate changes easier, especially in high-humidity or road-salt environments.
🛠️
Need help confirming fit?
Share your VIN or a photo of your rear plate mounting area with the EV Parts Online / Gruber Motors team, and we’ll verify compatibility before you order.
