Tesla Suspension — Model S Front Control Arm Hardware Installation Kit (22-Piece) — 2012–Jan 2021
Model S • RWD & AWD
Front Suspension • Hardware Kit
Free Shipping (Continental US)
International Delivery Available
GMC’s high-quality front control arm hardware installation kit includes the fasteners typically replaced when servicing the
six front control arms on Tesla Model S (2012 through Jan 2021), both RWD and AWD. Packaged for a straightforward, professional install.
- Comprehensive 22-piece kit for complete front control arm service.
- Fits Model S RWD & AWD — 2012 to Jan 2021.
- Free Shipping to the Continental US.
- International delivery available.
Kit Contents — 22 Pieces
| OE# Reference |
Description |
Qty |
| Bolt M10 × 1.50 × 100 |
Front control arm through-bolts |
4 |
| Nut HEX M14 × 2.0 |
Hex nuts for camber hardware |
4 |
| Nut M10 × 1.50 mm |
M10 locking nuts |
2 |
| Bolt M10 × 1.50 × 57 |
Short control arm bolts |
2 |
| Nut M10 × 1.50 |
Additional M10 locking nuts |
2 |
| Camber Bolt M14 × 2.00 × 114 |
Camber / eccentric bolts (set A) |
2 |
| Camber Washer M14 × 32 × 3 × 2.5 |
Camber washers (32 mm) |
2 |
| Camber Bolt M14 × 2.00 × 114 |
Camber / eccentric bolts (set B) |
2 |
| Camber Washer M14 × 38 × 6 × 2.5 |
Camber washers (38 mm) |
2 |
Compatibility & Fitment
| Vehicle |
Tesla Model S |
| Years |
2012–Jan 2021 |
| Drivetrain |
RWD & AWD |
| Position |
Front suspension (service of all six control arms) |
| Notes |
Have a 4-wheel alignment performed after installation. Torque all fasteners to factory spec on-vehicle at ride height. |
Installation Notes
- Intended for use when replacing the front six control arms on Model S.
- Replace single-use fasteners to maintain clamp load and safety.
- Tighten with the suspension loaded at ride height to prevent bushing wind-up.
Why buy from Gruber
- Exact-fit hardware — Sizes match factory specs for a seamless install.
- Fresh inventory — New fasteners for reliable torque retention.
- Expert support — Tesla-savvy team based in Phoenix, AZ.
