Tesla MS – Wheel Alignment Specifications

May 26, 2020
Request Service

Wheel Alignment

Table 1. Air Suspension (excluding Dual Motor All Wheel Drive)
 Location Front Rear
 Camber -0.75 +/- 0.45 -1.75 +/- 1.00
 Camber Split 0.00 +/- 0.30 Not applicable
Caster 4.00 +/- 0.50 Not applicable
 Caster Split 0.00 +/- 0.20 Not applicable
 Single Wheel Toe Out 0.05 (In 0.10 to Out 0.20) In 0.20 (In 0.05 to In 0.35)
 Total Toe Out 0.10 +/- 0.30 In 0.40 +/- 0.30
 Toe Split Not applicable 0.00 +/- 0.20
 Suspension Bolt Height 213.5 +/-5 mm 144 +/- 5 mm (151 +/- 5 mm for Performance Plus Suspension)
Track Width (at wheel center height) 1662 (ref) 1698 (ref)
Wheelbase ———————— 2960 mm (ref)———————
Table 2. Coil Suspension (excluding Dual Motor All Wheel Drive)
Location Front Rear
Camber -0.53 +/- 0.45 -1.25 +/- 1.00
Camber Split 0.00 +/- 0.30 Not applicable
Caster 3.70 +/- 0.50 Not applicable
Caster Split 0.00 +/- 0.20 Not applicable
Single Wheel Toe In 0.02 (In 0.17 to Out 0.13) In 0.19 (In 0.04 to In 0.34)
Total Toe In 0.04 +/- 0.30 In 0.38 +/- 0.30
Toe Split Not applicable 0.00 +/- 0.20
Suspension Bolt Height 230.0 mm (ref) 158 mm (ref)
Track Width (at wheel center height) 1662 mm (ref) 1698 mm (ref)
Wheelbase ————————-2960 mm (ref)———————
Table 3. Air Suspension (Dual Motor All Wheel Drive)
Location Front Rear
Camber -0.75 +/- 0.45 -1.75 +/- 1.00
Camber Split 0.00 +/- 0.30 Not applicable
Caster 4.00 +/- 0.50 Not applicable
Caster Split 0.00 +/- 0.20 Not applicable
Single Wheel Toe Out 0.05 (In 0.10 to Out 0.20) In 0.20 (In 0.05 to In 0.35)
Total Toe Out 0.10 +/- 0.30 In 0.40 +/- 0.30
Toe Split Not applicable 0.00 +/- 0.20
Suspension Bolt Height (at design) 213.5 +/-5 mm 144 +/- 5 mm with 245 mm front and rear tires (151 +/- 5 mm with 245 mm front, 265 mm rear tires)
Track Width (at wheel center height) 1662 mm (ref) 1698 mm (ref)
Wheelbase ———————— 2960 mm (ref)———————
Table 4. Coil Suspension (Dual Motor All Wheel Drive)
Location Front Rear
Camber -0.70 +/- 0.45 -1.25 +/- 1.00
Camber Split 0.00 +/- 0.30 Not applicable
Caster 3.90 +/- 0.50 Not applicable
Caster Split 0.00 +/- 0.20 Not applicable
Single Wheel Toe Out 0.02 (In 0.13 to Out 0.17) In 0.19 (In 0.04 to In 0.34)
Total Toe Out 0.04 +/- 0.30 In 0.38 +/- 0.30
Toe Split Not applicable 0.00 +/- 0.20
Suspension Bolt Height (at design) 217 mm (ref) 158 mm (ref)
Track Width (at contact patch) 1662 (ref) 1698 (ref)
Wheelbase ————————-2960 mm (ref)———————

Request Service
Posted in