Battery – Auxiliary – 12V (Remove and Replace)
FRT No: 17011202
Removal
- Disconnect 12V power (refer to procedure).
- Release the red plastic cover from the 12V positive connection.
- Disconnect the 12V battery positive connection (torque 10 Nm).
- Release the edge clip and the barrel clip that secure the 12V harnesses from the top of the battery cage.
- Release the edge clip that secures the coolant hose to the bottom of the battery cage.
- Release the battery vent tube by gently pulling it way from the 12V battery.
Note: The following image shows the 12V battery ground connection still connected.
- Remove the lower bolts (x2) that secure the battery cage to the plastic support beam (torque 6 Nm).
Note: Components have been removed in this graphic to aid clarity.
- Remove the upper bolts (x2) that secure the battery cage to the crossmember (torque 15 Nm).
Note: Components have been removed in this graphic to aid clarity.
- Remove the battery and battery cage assembly from the vehicle and set it on a flat surface.
- Remove the nut that secures the battery hold down bracket to the battery cage (torque 4 Nm). Remove the battery hold down bracket.
- Lift the 12V battery straight up to remove it from the battery cage.
Installation
Installation procedure is the reverse of removal.
This is a demo advert, you can use simple text, HTML image or any Ad Service JavaScript code. If you're inserting HTML or JS code make sure editor is switched to 'Text' mode.