Tesla Model S

PTC Heater Assembly

PTC Air Heater Core โ€” 6007385-00-E

Model S 2012โ€“2016 (pre-facelift) โ€ข LHD โ€ข Cabin HVAC electric PTC heater

Early Tesla Model S vehicles use a high-voltage PTC (Positive Temperature Coefficient) air heater rather than a coolant-based heater core. Mounted inside the HVAC box ahead of the firewall, this unit converts pack power directly into warm air for rapid cabin heating and defog/defrost performance.

The part offered here is the genuine Tesla Model S PTC Air Heater Core, Tesla P/N 6007385-00-E (and superseding revisions in the 6007385-00-x family) for Model S Feb 2012 โ€“ Mar 2016. It is the correct direct-fit replacement for pre-facelift cars that have lost cabin heat, show PTC-related HVAC faults, or have a failed high-voltage isolation check.

  • OEM PTC heater core โ€” Tesla-branded 6007385-00-E unit for factory fit and performance.
  • High-voltage cabin heat โ€” uses the traction pack to provide fast electric heating with no coolant loop warm-up delay.
  • Correct pre-facelift fitment โ€” designed for 2012โ€“2016 Model S HVAC housings and wiring; not the later GEN3 heater (P/N 1060432-00-E).
  • Common failure remedy โ€” resolves โ€œno cabin heatโ€ complaints caused by open-circuit heater elements or internal insulation faults.
  • Drop-in replacement โ€” reuses the existing HVAC case; no software changes typically required when replacing like-for-like part numbers.

Installation (High-Voltage Safety):
The PTC heater is supplied by the high-voltage pack and sits inside the HVAC plenum. Replacement requires safely powering down the HV system, removing the frunk tub and cowl plastics, opening the HVAC case, swapping the heater core, and re-sealing the housing. We strongly recommend installation by a technician experienced with Tesla high-voltage systems and Model S interior trim removal.

Spec Detail
Tesla Part Number 6007385-00-E (supersedes earlier/later 6007385-00-x revisions for 2012โ€“2016 Model S)
Application Tesla Model S Feb 2012 โ€“ Mar 2016 (pre-facelift, LHD) cabin HVAC PTC air heater core
Heater Type Positive Temperature Coefficient (PTC) ceramic electric air heater, high-voltage
System Voltage Nominal 350โ€“400ย Vย DC traction pack (via dedicated HV feed and contactors)
Location Inside HVAC box, ahead of the firewall, downstream of the blower and evaporator core
Typical Failure Modes Open or shorted PTC elements, internal thermal fuse failure, high-voltage isolation faults, or water intrusion
Service Recommendation Replace heater core as an assembly; inspect HVAC drains and cowl seals, and verify HV connectors are clean and dry
Warranty Contact Gruber for warranty and core-exchange options on refurbished vs. new OEM units

TIP

Maintenance Tip:Exercise the heater a few times each seasonโ€”especially in mild climatesโ€”by turning on the cabin heat and verifying warm air output. If you notice weak heat, HVAC faults, or a persistent โ€œcold cabinโ€ in winter, diagnose the PTC early to avoid driving in freezing weather without heat.

PRICE:

$295.00

Gruber Motors