ElectraMeccanica SOLO — Original OEM Alloy Wheel — Model 4035
Genuine OEM wheel • Model 4035 • 15 × 4.5 in. • 4×100 mm bolt pattern • +33 mm offset • 67.1 mm center bore • Silver finish
This ElectraMeccanica SOLO Model 4035 Alloy Wheel is a genuine OEM wheel originally manufactured for the SOLO three-wheeled, single-occupant electric vehicle. These are original ElectraMeccanica production wheels, not aftermarket substitutes, providing the factory-correct dimensions, mounting geometry, offset, center bore, appearance, and fitment intended for the SOLO.
The Model 4035 wheel measures 15 × 4.5 inches and features a 4-hole, 4×100 mm bolt pattern, +33 mm offset, 67.1 mm center bore, and the original silver finish. For owners repairing collision damage, replacing a damaged wheel, or restoring a SOLO to its original configuration, this OEM wheel provides a factory-correct replacement without adapting a generic aftermarket wheel.
Why OEM Matters
Original ElectraMeccanica part — Genuine wheel sourced from original SOLO vehicle production inventory.
Factory-correct dimensions — Original 15 × 4.5-inch wheel specification.
Correct offset — +33 mm offset maintains the intended wheel positioning.
Correct center bore — 67.1 mm center bore matches the original wheel specification.
Original styling — Preserves the distinctive multi-spoke design and silver finish of the ElectraMeccanica SOLO.
No aftermarket adaptation — Designed for the original SOLO application rather than adapted from a universal replacement wheel.
OEM Wheel Specifications
Specification
OEM Detail
Model
4035
Wheel Size
15 × 4.5 inches
Number of Holes
4H / 4-hole
PCD / Bolt Pattern
100 mm / 4×100 mm
Offset
+33 mm
Center Bore
67.1 mm
Finish
Silver
Highlights
Genuine OEM ElectraMeccanica wheel — Not an aftermarket reproduction or universal replacement.
Original production inventory — Sourced from ElectraMeccanica SOLO vehicle production parts inventory.
Model 4035 — Original wheel model used for the SOLO application.
Factory silver finish — Maintains the original exterior appearance of the vehicle.
Multi-spoke alloy construction — Matches the distinctive factory SOLO wheel design.
Factory mounting specifications — 4×100 mm bolt pattern, +33 mm offset, and 67.1 mm center bore.
Ideal for restoration or collision repair — An important replacement component for damaged, bent, cracked, or cosmetically compromised original wheels.
Category
Detail
Application
ElectraMeccanica SOLO three-wheeled, single-occupant electric vehicle
Part Type
Alloy road wheel / rim
Manufacturer
Original ElectraMeccanica OEM component
Inventory
Original ElectraMeccanica SOLO production inventory
Construction
Alloy wheel
Fitment
Factory-specific ElectraMeccanica SOLO wheel application
What’s Included
One genuine OEM ElectraMeccanica SOLO Model 4035 alloy wheel
Wheel is sold individually unless otherwise specified. Tire, center cap, valve stem, TPMS components, lug hardware, and other related components are not included unless specifically stated in the product listing. Confirm vehicle application before installation.
Installation Notes
Inspect the wheel, hub mounting surface, and related hardware before installation.
Transfer or install the appropriate tire, valve stem, and applicable tire-pressure monitoring components as required.
Use the correct SOLO wheel mounting hardware.
Tighten wheel fasteners evenly and to the vehicle manufacturer’s specified torque.
After installation, verify proper tire clearance and wheel rotation before operating the vehicle.
Professional tire mounting, balancing, and wheel installation are recommended.
With ElectraMeccanica SOLO production discontinued, access to factory-specific replacement components is increasingly important for keeping these unique EVs on the road. This genuine OEM ElectraMeccanica SOLO Model 4035 wheel provides the exact original specifications — 15 × 4.5 inches, 4×100 mm PCD, +33 mm offset, 67.1 mm center bore, and silver finish — for proper repair, restoration, and long-term preservation of the vehicle.
